The proposed hot ferroalloys sorting machine has a uniqueness tested by successful operation. Phone references.

The main purpose of the hot ferroalloy sorting machine (hereinafter referred to as MSHF) is to receive the flow of discharged hot metal from the mold of the casting machine and perform separation into specified fractions. The most optimal arrangement of the above equipment performs the division into three fractions - 0-10mm, 10-50mm and +50mm (if necessary, the +50mm fraction is sent for crushing). The use of MSGF significantly reduces crane operations for transshipment of boxes with metal (calculated for each enterprise individually), the formation of fines (fraction 0-10mm) is reduced, since one stage of transshipment to DSC is completely excluded, and with current orders for the sale of a fraction of +50mm, the stages of transshipment and crushing are excluded altogether.

Below are the main technical characteristics of the MSGF: 1. The productivity of the machine according to the initial feed is carried out according to the instructions of the Customer and can be in the range of 70-110 t/h. 2. The number of tiers MSGF - 2 pcs. 3. The area of the screening surface of one tier is 3 sq.m. 4. The dimensions of the screening surface are 1500x2000 mm. 5. Adjustable oscillation amplitude - 3.3-5.0 mm, with the possibility of changing both the lower and upper specified parameters. 6. Angle of inclination of the screening surface - 5...9 degrees.

Technical description

The purpose of the screen is for sieving ferroalloys with a particle size of 50 and 10 mm.

The temperature of the material (ferroalloy) is not more than 800°C.

The maximum size of the incoming material is 200 mm.

Drive power 2*7.5kW

Maximum oscillation amplitude 7.5 mm

dimensions Length - 3000 mm Width without drive - 1900 mm Height - 2000 mm

Design features

1. Screen boards and screen beams

2. Ventilated beams

3. Glandless shaft seals

4. Protective motors

5. Lobe couplings of increased reliability of double design

6. The use of rivets in joints when attaching beams to the sides

7. Application of high-temperature greases for bearing units

8. Delivery in the SPTA complex 1. Springs 2. Couplings 3. Vibrator units assembled with bearings 2 pcs or 4 pcs 4. Sieves with elements of their fastening 5. Breathers, gaskets and hardware 6. Control cabinet with a drive, with temperature control devices for motors and bearing units.